How to Burn Wood Briquettes in a Stove or Fireplace

Wood briquettes are easy to use, but they do not behave exactly like logs. They are drier, denser and can burn hotter, and some types expand as they burn. Load them like logs and you may smother the fire, or overheat the stove.
This step-by-step guide shows how to light, load and control wood briquettes in a stove or open fire, with specific tips for RUF blocks and Pini Kay logs. Dekalyi supplies both types; see the wood briquettes.
Before You Start: Check Your Appliance
Read your stove manual. Some manufacturers give specific guidance on briquettes, including maximum loads.
Check the chimney. A swept, clear flue is essential for any solid fuel.
Fit a carbon monoxide alarm in the room with the stove.
Use only wood briquettes in a wood-burning stove unless the manufacturer approves other fuels.
Step 1: Light a Small, Hot Fire
Briquettes catch best on an established fire:
Open the stove's air controls fully.
Place a natural firelighter and dry kindling in the centre of the grate.
Add a few small pieces of dry wood or a broken briquette.
Light and leave the door slightly ajar for a few minutes if your stove allows, until the kindling is burning strongly.
RUF blocks can be broken into smaller chunks by hand or by snapping them across a hard edge. Small chunks make excellent kindling boosters.
Step 2: Add the First Briquette
Once you have a bed of burning kindling, add one or two briquettes, depending on stove size:
Small stoves (around 5 kW or less): start with one RUF block or one Pini Kay log, or half a block.
Larger stoves: two briquettes may be appropriate.
Leave space around briquettes for air to circulate. Pini Kay logs have a central hole that helps air flow through them; place them so air can reach the hole.
Step 3: Let the Briquettes Catch Fully
Keep the air controls open until the briquettes are burning well on all sides. Briquettes are dense, so they take a little time to catch but then burn steadily.
Step 4: Control the Burn
Once the briquettes are burning well, gradually reduce the air supply according to your stove's instructions. Because briquettes are very dry, they burn efficiently at lower air settings than damp logs, but do not close the air down so far that the fire smoulders, which causes smoke and soot.
Step 5: Reload Little and Often
Add one briquette at a time when the previous load has burned down to glowing embers. Overloading with briquettes can make the stove too hot. Woodfuel Direct warns that some briquettes burn at a very high temperature and could damage some wood burners if the heat output is too high.
RUF Briquettes: Specific Tips
Expect expansion. Pressed sawdust blocks can loosen and expand as they burn. Leave space; do not pack the firebox.
Break into pieces for small stoves or to control heat.
Lay blocks flat for a slower burn, or on edge for faster heat.
Dekalyi's RUF blocks are 24.5 × 8.5 × 9.5 cm and 1.7–2 kg each; check they fit your firebox with room to spare.
Pini Kay Briquettes: Specific Tips
Use the central hole. Place logs so air can flow through the hole, which creates a chimney effect.
Expect less expansion. Lekto notes that Pini Kay logs don't expand as much as regular heat logs and don't roll, split or spark.
Allow for high heat. Pini Kay logs are very dense; one at a time is often enough in a small stove.
Break if needed with a hatchet or by scoring and snapping, as they are harder than RUF blocks.
Mixing Briquettes with Logs
Briquettes and logs work well together:
Use logs for a lively flame and briquettes for long-lasting heat.
Add a briquette to a log fire before bed for longer-lasting embers.
Use broken RUF pieces as kindling boosters.
Lekto recommends adding hardwood heat logs alongside regular firewood to increase heat output and burn time.
Briquettes in Open Fireplaces
Open fires are less efficient and less controllable than stoves. Pini Kay logs, which hold their shape, often work better than RUF blocks, which can crumble and fall through the grate. Use a fireguard and avoid overloading.
Briquettes Outdoors
Briquettes can be used in fire pits and chimineas, where their steady heat suits long evenings. Dekalyi lists outdoor heating and cooking among uses. For cooking directly over briquettes, confirm with the supplier that the product is suitable, and let flames die down to embers before cooking.
How Long Do Briquettes Burn?
Burn time depends on briquette type, stove size, air setting and how many you load. Lekto gives about 2–3 hours for its Pini Kay eco logs, up to 4 hours for its fire logs and up to 8 hours for its bark-based night briquettes. RUF blocks typically burn steadily for a long time and can be broken up to give shorter, hotter bursts. Track your own stove's behaviour over a few evenings to find the right loading routine. Note how long each load gives useful heat, how much ash remains and how quickly the room cools afterwards; these observations tell you whether to break blocks smaller, load one more piece or adjust the air setting.
Overnight Burning
Some users want a stove to stay warm overnight. Dense briquettes help, but safety comes first: never leave a stove with the door open or the room unventilated, and follow the manufacturer's guidance on overnight use. A common approach is to add a briquette to a good bed of embers before bed and reduce the air to the setting recommended for slow burning, without closing it completely.
Kindling from Briquettes
Broken RUF pieces make excellent kindling. Snap a block into finger-sized sticks or small chunks, then use them in place of, or alongside, conventional kindling. Because they are very dry, they catch quickly and help the fire reach temperature fast, which reduces smoke during lighting.
Common Mistakes
Loading too many briquettes at once, which can overheat the stove.
Packing RUF blocks tightly, leaving no room to expand.
Closing the air too early, causing smouldering and soot.
Using damp briquettes, which crumble and smoke.
Ignoring the stove manual, which may limit loads or fuel types.
Storage Keeps Briquettes Burning Well
Briquettes absorb moisture from damp air. Woodfuel Direct notes that moisture causes them to expand and ruins burning efficiency. Store packs indoors, sealed, off the floor and away from damp walls. The Wood Fuel Co-operative advises that briquettes can be stored in watertight sheds, garages or plastic garden stores, but any moisture ingress causes problems.
Ash and Cleaning
Quality briquettes leave little ash; Dekalyi lists below 0.8% for its RUF briquettes. Empty the ash pan regularly, leaving a thin bed of ash on the grate if your stove manufacturer recommends it. Keep stove glass clean by burning briquettes hot enough and avoiding smouldering.
Choosing the Right Briquette for Your Stove
Small stoves and inserts: RUF blocks broken into pieces give flexible heat control.
Medium and large stoves: Pini Kay logs or whole RUF blocks give long, steady heat.
Open fires: Pini Kay logs, which hold their shape.
Multi-fuel stoves: follow the manufacturer's advice on wood fuel; burn wood on a bed of ash if recommended, and open the riddling grate settings appropriately.
Boilers and furnaces: follow equipment guidance on briquette size and loading.
Troubleshooting
Problem | Likely cause | Solution |
Briquette will not catch | Fire not hot enough | Build a hotter kindling fire first |
Stove overheats | Too many briquettes | Load fewer; reduce air once burning well |
Briquettes crumble | Damp storage or RUF expansion | Store dry; leave space in the firebox |
Smoky fire | Air closed too early | Open air until briquettes burn fully |
Black glass | Smouldering burn | Burn hotter; use airwash setting |
Briquettes and Chimney Health
Dry briquettes produce less moisture in the flue than damp logs, which reduces condensation and tar deposits when burned hot enough. But no fuel removes the need for regular chimney sweeping. Smouldering briquettes with the air turned down too far can still deposit soot. Burn with a lively flame, keep the stove glass clean as a visual indicator, and book a sweep at least as often as your stove manufacturer and local regulations recommend.
Using Briquettes in Boilers
Some solid-fuel boilers accept briquettes, and Dekalyi lists boilers and furnaces among its applications. Boiler fireboxes are often larger and burn at different rates from room stoves. Follow the boiler manufacturer's guidance on fuel size, loading frequency and air settings, and avoid packing the firebox so tightly that air cannot circulate between briquettes.
Safety
Never use flammable liquids to light briquettes.
Keep a fireguard in front of open fires.
Dispose of ash only when completely cold, in a metal container.
Keep a working carbon monoxide alarm.
Have the chimney swept regularly.
Order Briquettes from Dekalyi
Dekalyi supplies RUF hardwood briquettes (4.9 kWh/kg, ash below 0.8%, moisture below 8%) and Pini Kay briquettes made in Poland, for home heating, fireplaces, stoves and outdoor use. Request a quote, or read RUF vs Pini Kay briquettes.
FAQ: How to Burn Wood Briquettes
How do you light wood briquettes?
Start a small, hot fire with kindling and firelighters, then add one or two briquettes once the kindling is burning well.
How many briquettes should I put in a stove?
Start with one or two depending on stove size and add one at a time. Follow your stove manual.
Can briquettes damage my wood burner?
They burn hot, so overloading can overheat a stove. Use fewer than you would logs.
Should I break RUF briquettes?
Breaking them into chunks helps lighting and heat control, especially in small stoves.
Why do my briquettes fall apart?
RUF blocks can expand as they burn. Damp storage also makes briquettes crumble.
Can I mix briquettes and logs?
Yes. Mixing gives ambience from logs and long-lasting heat from briquettes.
Can I use briquettes in an open fire?
Yes, with care. Pini Kay logs usually hold their shape better in open grates



Comments