Alder Firewood: Heat Output, Drying Time, and Is It Good for Burning?

Ask a group of wood-burners about alder, and you will get two answers. Some dismiss it as a light wood that burns too fast. Others like it because it lights easily, dries quickly, burns cleanly and smells good. Both camps are partly right.
Alder is a lighter hardwood, so a basket of alder logs holds less heat than the same basket of oak or beech. Kilogram for kilogram, though, dry alder releases about as much energy as any other wood. Whether alder is "good firewood" depends on what you need the fire to do. This guide gives the measured figures, explains them, and shows where alder fits best. If you already know what you need, see the Dekalyi alder wood for air-dried and kiln-dried alder logs.
Which alder are we talking about?
Alders are trees of the genus Alnus. In Europe, the firewood and timber species is black alder, also called common or European alder (Alnus glutinosa). German timber merchant Espen notes that black alder is the only European alder that provides commercially usable wood, as grey alder rarely reaches usable size.
Most online firewood charts are American and list red alder (Alnus rubra), which grows on the Pacific coast of North America. The two species are similar in weight and burning behaviour, so red alder figures are a useful guide, but we label them clearly below.
How much heat does alder firewood produce?
Heat output can be expressed per kilogram or per unit of volume, and the two tell different stories.
Per kilogram, alder is close to every other wood. Dry wood of all species has a calorific value of roughly 18.5–21 MJ/kg, according to a European wood-fuel training text from the EURES/University of Eberswalde series. The same source lists alder at about 19.0 MJ/kg of dry matter. In other words, a dry kilo of alder gives about the same energy as a dry kilo of oak.
Per volume, alder is lower because it is lighter. Firewood is usually sold by volume (crates, bags, stacked or loose cubic metres), so density matters. A European wood-energy reference table gives the following typical densities at 13% moisture:
Species | Typical density at 13% moisture |
Black alder | 560 kg/m³ |
Birch | 650 kg/m³ |
Ash | 720 kg/m³ |
Beech | 750 kg/m³ |
Sessile / pedunculate oak | 760–770 kg/m³ |
So a cubic metre of alder holds roughly a quarter less wood, and therefore less heat, than a cubic metre of beech or oak.
US charts say the same thing. The firewood comparison chart published on Hearth.com gives red alder about 17.2 million BTU per cord, against figures in the mid-20s or higher for dense hardwoods. The Old Farmer's Almanac places red alder in its "low heat value" group.
Why alder burns faster
Lower density means less wood in each log and more air spaces within it. Flames reach the fibre more easily, so alder catches quickly and burns briskly. Dekalyi's own product page describes its alder firewood as easy to ignite, with a clean, steady burn, low to moderate smoke and a medium burn time.
In practice, that means you will load the stove more often than with oak or beech to hold the same temperature through a long evening. It also means alder is one of the easier hardwoods to get going in a cold stove.
How long does alder take to dry?
Alder seasons relatively quickly. Firewood guides commonly quote around 6–12 months of air drying for split alder, with the longer end in damp climates. One US guide gives 6–8 months, or 8–12 months in humid conditions.
That speed is one of alder's real advantages. Dense oak usually needs considerably longer to air-dry, while alder split in spring is often usable the following winter, as long as it is stored well:
Split logs before drying; whole rounds dry far more slowly.
Stack them off the ground in a single row with the bark side up on top.
Cover the top but leave the sides open to the wind.
Keep stacks in a sunny, breezy position rather than against a damp wall.
Kiln drying removes the wait altogether. Kiln-dried logs are dried in a controlled chamber to a low, consistent moisture content in days rather than months. Dekalyi offers alder firewood both air-dried and kiln-dried; read more about the process on our kiln dried firewood.
What moisture content should alder firewood have?
The benchmark across Europe and the UK is 20% moisture or less. In England, wood sold for domestic burning in volumes under 2 m³ must be certified "Ready to Burn", confirming a moisture content of 20% or less, according to UK government guidance.
Wet wood wastes energy boiling off water, produces more smoke and builds up tar in the flue. For a quick check:
Split a log and push the pins of a moisture meter into the freshly split face, not the outside.
Test several logs from different parts of the stack.
Treat the batch as ready only if all readings are at or below 20%.
Ireland's COFORD forestry programme notes that cheap rapid meters are a useful guide but are not very accurate, so give yourself a margin.
Kiln-dried or air-dried alder: which should you buy?
Both can make excellent firewood. The difference is consistency and timing.
Kiln-dried alder is dried in a heated chamber to a low, controlled moisture content. It is ready to burn on arrival, lights very easily and suits customers who want to burn straight away or who live in smoke-controlled areas. Ask the supplier for the target moisture content, because "kiln-dried" on its own does not guarantee a figure.
Air-dried alder is seasoned outdoors under cover. It costs less to produce, but its moisture depends on weather and storage time. It suits buyers who can store logs for a few months before burning and who check moisture themselves.
For retailers selling small bags or crates, kiln-dried stock removes most of the risk of customer complaints about wet wood.
Comparing alder prices fairly
Because alder is lighter, compare it on heat per unit of money, not just price per cubic metre. Using the typical densities above, a cubic metre of black alder (about 560 kg/m³) holds roughly three-quarters of the wood in a cubic metre of beech (about 750 kg/m³). At the same moisture content, that means roughly three-quarters of the heat.
A simple rule follows: alder is good value when it costs noticeably less per cubic metre than dense hardwood, enough to make up for that gap, or when its other strengths, such as quick lighting, fast drying or cooking use, matter more to you than maximum heat per load.
Pros and cons of alder firewood
Pros | Cons |
Lights quickly; good for starting fires | Less heat per log and per cubic metre than oak or beech |
Seasons faster than dense hardwoods | Burns faster, so needs more frequent reloading |
Clean, steady flame with low to moderate smoke (when dry) | Leaves fewer long-lasting coals for overnight burns |
Easy to split | Rots quickly if stored damp |
Pleasant aroma; traditional for cooking and smoking | Not ideal as the only fuel in very cold weather |
When is alder the right firewood?
Alder makes most sense when you value ease and quick heat over long burn time:
Starting fires. Use alder to get a stove up to temperature, then add denser logs.
Spring and autumn. Shorter, milder evenings do not need the slow, long burn of oak.
Open fires and fire pits. A bright, lively flame suits social fires.
Outdoor cooking and smoking. Alder's mild smoke is a European tradition for fish and meat. See our guide to alder wood for smoking.
Mixing with hardwoods. Many users combine alder with beech, ash or oak to balance quick heat and long burn.
For overnight burning or the coldest weeks, dense logs such as oak, beech or ash give more heat per load. Our alder vs oak comparison sets out the differences in detail.
How to burn alder efficiently
Burn only dry wood (20% moisture or less).
Use smaller splits to light the fire, then larger pieces once the stove is hot.
Avoid closing the air down too early; alder burns cleanest with a good flame.
Load little and often rather than packing the firebox.
Have the chimney swept regularly, as you would for any wood fuel.
Buying alder firewood in bulk
If you are a retailer or distributor, ask your supplier for:
Moisture content and how it is measured.
Drying method: air-dried or kiln-dried.
Log length and split size to suit your customers' stoves.
Packaging: bags, crates or loose on pallets.
Volume basis: stacked, loose or solid cubic metres, which are not interchangeable.
Remember that alder is lighter than beech or oak, so price comparisons should account for heat per cubic metre, not just price per cubic metre.
Order alder firewood from Dekalyi
Dekalyi S.P. Z.O.O in Warsaw supplies alder as logs or split firewood, air-dried or kiln-dried, with custom sizes available. Request a quote with your log length, moisture requirement, packaging and volume, or view the alder wood.
FAQ: alder firewood
Is alder good firewood? It is fair to good. Alder lights easily, dries quickly and burns cleanly, but it gives less heat per log than dense hardwoods such as oak or beech and burns faster.
What is the BTU of alder firewood? US charts give red alder about 17.2 million BTU per cord. Per kilogram, dry alder has about 19 MJ/kg, similar to other woods.
How long does alder take to season? Split alder usually needs about 6–12 months of air drying, depending on climate and storage. Kiln-dried alder is ready immediately.
Does alder burn hot? Dry alder burns with a lively, clean flame and heats a stove quickly, but it burns out faster than denser woods.
Can you burn alder in a wood stove? Yes, if it is dry (20% moisture or less). It is useful for lighting and for milder weather, often mixed with denser logs.
Is alder better than birch for firewood? They are similar. Birch is somewhat denser (about 650 vs 560 kg/m³ at 13% moisture), so it gives a little more heat per volume.
Does alder spark or spit? Dry alder generally burns calmly. Spitting is usually a sign of wet wood or trapped moisture, so check the moisture content.



Comments