top of page
Search

Steamed vs Unsteamed Beech Wood: Which Should You Order?

15 hours ago
7 min read

If you buy beech timber regularly, you will see two descriptions on price lists: steamed beech and unsteamed (often called white) beech. They are the same species, cut from the same kind of logs. The difference is a hot, saturated steam treatment applied before kiln drying, and it changes the colour of the wood and, to some degree, how it behaves during drying and machining.

Choosing the wrong one is an expensive mistake. A furniture line designed around pale Scandinavian tones will look wrong in pinkish-brown steamed beech, while a chair factory that needs consistent colour across thousands of parts may struggle with the variation in unsteamed stock. This guide explains what steaming does, what the research and the trade say about it, and how to write your choice into a purchase order.


What does "steamed beech" mean?

Steamed beech is freshly sawn (green) beech that has been held in a steam chamber, typically at temperatures close to 100 °C and near-saturated humidity, for a period of hours to days before it goes into the drying kiln. The heat and moisture trigger chemical changes in the wood's extractives and cell-wall components that darken the colour throughout the board, not just at the surface.

Unsteamed beech skips this step. It goes straight from the saw to air drying or kiln drying, keeping its natural pale colour.

Steaming is done at the sawmill, early in processing, so it is a decision made before the timber is dried and graded. That has a practical consequence for buyers: you cannot convert unsteamed stock into steamed stock later in your own factory. If a project needs one or the other, put it in the order, because a supplier can only ship what was processed months earlier.

Steaming is not the same as thermal modification (sometimes sold as "thermo beech" or TMT). Thermal modification uses much higher temperatures in low-oxygen conditions to change the wood's moisture behaviour more permanently, and it produces a darker brown colour. Ordinary steamed beech is a standard furniture timber, not a modified one.

Colour: the most visible difference

Colour is why most buyers choose one or the other.

Steamed beech turns a fairly uniform pinkish to reddish-brown. Woodworking Network notes that steaming makes sapwood nearly as dark as heartwood and gives heartwood a more uniform colour. Because almost all European beech traded internationally is steamed before drying, the same source says this pink tone has become the colour many buyers associate with European beech.

Unsteamed beech is paler: off-white to light cream-brown with a faint pink cast. UK merchant Timbersource describes unsteamed stock as "usually paler" than lightly steamed beech. It suits light, natural interiors and products that will be stained or painted in pale colours.

A 2015 study by Milić, Todorović and Popadić at the University of Belgrade dried steamed and unsteamed beech boards in the same kiln stack. The dried steamed timber was darker and more reddish than the unsteamed boards, confirming the trade experience in controlled conditions.

Steaming is also used to reduce the contrast between normal wood and the darker central "red heart" (false heartwood) that some beech logs contain. Researchers have studied steaming specifically as a colour-homogenisation treatment for this reason.


Drying quality and stability

Beech is known for high shrinkage and internal stress. This is the main technical argument for steaming.

  • Drying quality. The Belgrade study found that equal or even better drying quality can be expected from steamed beech than from unsteamed beech under the same drying schedule. It found no statistically significant difference in the final moisture content measures it examined.

  • Stress and stability. Many woodworkers and merchants report that steamed beech is more stable and less prone to springing when ripped. Researchers working on beech panels have also noted that steaming appears to stabilise the final product. The evidence is suggestive rather than conclusive, so treat "more stable" as a tendency, not a guarantee.

  • Moisture measurement. The same Belgrade paper found that kiln probes measured steamed and unsteamed beech differently in the 7–15% moisture range and proposed a correction. If you check incoming timber with a resistance meter, use the correct species and treatment setting, and verify with an oven-dry test on samples when it matters.

What steaming does not do is remove the need for correct drying. Steamed or unsteamed, beech should arrive at the moisture content your process needs, typically 8–12% for interior furniture, which is the standard range on the beech wood

Workability, strength and durability

For most factory purposes, steamed and unsteamed beech machine, glue and finish in a similar way. Both turn well, both sand to a fine surface and both take finishes evenly. Steaming may make the wood slightly easier to work, according to some woodworkers, but published data on this is limited.

Steaming at normal commercial settings is not intended to change strength meaningfully. Research on long or intense steaming schedules has measured changes in physical and mechanical properties, but standard light steaming is a colour and drying treatment. For structural or high-load parts, specify the grade and moisture content and rely on supplier data rather than assuming either version is stronger.

Neither version gains decay resistance from steaming. Both are non-durable and belong indoors. If you need outdoor durability, see our oak wood range instead.


Steamed vs unsteamed beech: side-by-side

Factor

Steamed beech

Unsteamed (white) beech

Process

Steam chamber before drying

Sawn, then air- or kiln-dried

Colour

Uniform pinkish to reddish-brown

Pale cream to light brown, faint pink

Sapwood/heartwood contrast

Reduced

More visible

Red heart contrast

Reduced by steaming

More visible

Drying quality

Equal or better under the same schedule (Milić et al., 2015)

Good with correct schedule

Stability in machining

Widely reported to be better; evidence is mixed

Can spring more when ripped

Best for

Chairs, stairs, worktops, solid furniture needing uniform tone

Light Scandinavian styles, pale stains, white or pastel paint

Outdoor use

No

No

Which should you choose?

Choose steamed beech if:

  1. You need consistent colour across many parts, such as chair components or flooring.

  2. Your product will have a clear finish and the warm pink-brown tone suits the design.

  3. Your boards include sapwood and red heart and you want them to blend.

  4. You machine narrow parts from wide boards and want to minimise springing.

Choose unsteamed beech if:

  1. Your design depends on a very pale, natural or Nordic look.

  2. You will apply white, pastel or very light stains, where a pink base would show through.

  3. You are matching existing unsteamed stock.

If you are unsure, order samples of both and finish them with your actual coating. Colour under a clear lacquer, oil or water-based finish can look quite different from raw timber, and both versions shift in colour over time with light exposure.


Common problems with beech colour, and how to avoid them

Most colour complaints about beech come from expectations that were never written down. These are the issues buyers raise most often:

  1. Mixed tones within a delivery. Unsteamed beech can vary from cream to light brown, with darker red heart in some boards. If uniformity matters, order steamed beech or specify a grade that limits red heart.

  2. Pink where white was expected. Steamed beech cannot be bleached back to the pale tone of unsteamed beech. Confirm the treatment before shipment, not after.

  3. Grey or blue stain. Freshly sawn beech that sits wet in warm weather can develop fungal stain. This is a handling and drying issue, not a steaming issue. Ask how quickly logs and boards are processed after felling.

  4. Colour shift after finishing. Oils and solvent-based lacquers tend to warm the tone; water-based finishes keep it lighter. Test your real finish on samples from the actual delivery.


How to check what you received

When a delivery arrives, cut a few boards across their width. Steaming colours the wood throughout, so a steamed board shows an even pinkish-brown inside, while unsteamed beech stays pale. Check the moisture content of several boards from different packs, and compare the colour against the reference samples agreed in your order. Record any differences with photos and pack numbers straight away, so claims can be resolved quickly.


How to specify steaming on your purchase order

Vague orders cause disputes. Woodworking Network advises buyers to state on the purchase order what they expect from steamed lumber, including that sapwood should be nearly as dark as heartwood. A practical specification includes:

  1. Treatment: "steamed" or "unsteamed (white)".

  2. Drying: kiln-dried to a stated moisture range, for example 8–12%.

  3. Grade: A, AB or B, with how much red heart is acceptable.

  4. Colour acceptance: reference samples or photos agreed before shipment.

  5. Dimensions: thickness, width and length ranges, edged or unedged.

  6. Volume and packing: pallet or container load, wrapping, marking.

Dekalyi supplies beech in A, AB and B grades, kiln-dried or air-dried, in custom sizes and in bulk. State your treatment and colour preference in your enquiry and we will confirm what can be supplied for your volume and timeline.


Request a beech timber quote

Tell us the treatment, grade, moisture content and dimensions you need. Request a quote from Dekalyi or review the beech wood specifications.


FAQ: steamed beech wood

Why is beech wood pink? Most European beech on the market is steamed before drying, which turns it a pinkish to reddish-brown colour throughout. Unsteamed beech is much paler.

Is steamed beech stronger than unsteamed beech? Standard light steaming is a colour and drying treatment and is not intended to change strength meaningfully. Specify grade and moisture content for loaded parts.

Is steamed beech more stable? Many woodworkers and some researchers report better stability and less springing, and a Belgrade study found equal or better drying quality. The evidence is not conclusive, so correct drying still matters most.

Can steamed beech be used outdoors? No. Steaming does not improve decay resistance. Steamed and unsteamed beech are both non-durable and are interior timbers.

Is steamed beech the same as thermally modified beech? No. Thermal modification uses far higher temperatures in low-oxygen conditions and produces a darker, more permanently modified wood. Steamed beech is a standard furniture timber.

Which is better for painted furniture? For white or pale paint, unsteamed beech gives a lighter base. For dark paint, either works; both take paint evenly because of beech's fine, closed grain.

 
 
 

Comments


bottom of page