Ash Dieback and Ash Timber: Can You Still Use Ash Wood?

Ash dieback has transformed Europe's woodlands. Over roughly three decades, a fungal disease from Asia has spread across the continent, killing or weakening a large share of common ash trees. For anyone who buys, works or burns ash, the obvious question is: is ash timber still usable?
The short answer is yes, ash from healthy or recently felled trees can still be used as timber and firewood, but the disease can degrade wood quality, especially in trees left standing for a long time after infection. This guide explains what ash dieback is, how it affects timber, what official guidance says and what buyers should ask. For Dekalyi's ash timber, see the ash wood page.
What is ash dieback?
Ash dieback is caused by the fungus Hymenoscyphus fraxineus (formerly known by the name of its asexual stage, Chalara fraxinea). H&H Land & Estates describes it as native to eastern Asia and affecting ash trees across Europe, with a particular impact on common ash (Fraxinus excelsior).
The UK Woodland Trust notes that the disease was first identified in the UK in 2012 but may have been present for much longer, and that it has become widespread. The fungus overwinters in leaf litter, especially on the leaf stalks of fallen ash leaves, and releases airborne spores in summer and autumn that infect new leaves.
How it affects trees
Infection typically causes:
Wilting and blackening of leaves.
Dieback of shoots and branches from the crown.
Lesions on stems and branches.
In severe cases, death of the tree, often helped by secondary pathogens such as honey fungus at the root collar.
The Field magazine notes that young ash is particularly susceptible, but older, mature ash is also falling victim, and that progress in individual trees can be quick.
Does ash dieback affect the timber?
This is the key question for buyers, and the answer depends on how far the disease has progressed.
Early or limited infection. The fungus mainly attacks leaves, shoots and the bark and wood near lesions. Wood from trees felled before serious decline can be sound. UK Forest Research guidance states that where no infection is present or suspected, routine work on ash should continue and timber can be removed, chipped and processed as usual.
Advanced decline and dead trees. As trees decline and die, other fungi colonise the wood. H&H Land & Estates notes that the disease can lead to a significant degradation in the quality of timber for hurley sticks and milled timber, and that trees left for a considerable time can yield poorer-quality firewood and biomass with more fines. The Field describes timber quality degrading, becoming brittle and structurally unsound, within a couple of years in affected trees.
Practical consequence: healthy-looking, recently felled ash can still be good timber; long-dead or heavily decayed ash is suitable at most for firewood or biomass, and sometimes not even that.
Can you use ash dieback wood for furniture and joinery?
Yes, if the timber itself is sound. Diseased trees felled promptly may produce good boards, sometimes with dark staining near lesions. Buyers should inspect for:
Discolouration and staining that may affect appearance grades.
Soft, punky or brittle wood from secondary decay.
Cracks and shakes in stressed areas.
Reduced toughness, which matters for handles and sports goods.
For structural, handle and sports applications, where toughness is critical, select only sound timber from healthy or promptly felled trees. Read our guide to ash for tool handles and sports equipment.
Can you burn ash dieback wood?
Generally yes. UK firewood supplier Logs Direct states that wood from trees affected by ash dieback is safe to burn as firewood, provided it is properly seasoned and dried. Ash is one of the best firewoods when dry.
However, quality matters. Forum reports from UK firewood producers on Arbtalk describe buyers grading dieback ash, separating timber with rot and discolouration for biomass chip, and finding that decayed timber can shatter in firewood processors. As with any firewood, burn it only when dry, below 20% moisture. See kiln dried firewood for ready-to-burn logs.
Are there restrictions on moving ash timber?
Rules vary by country and change over time. In the UK, Forest Research's guidance on managing ash includes advice on handling logs and firewood, such as reducing the movement of leaf and shoot material. Because the disease spreads mainly through airborne spores from leaf litter, timber itself is a lower-risk pathway than leaves and plants, but buyers and sellers should check current national plant-health rules for their country and for imports.
What ash dieback means for ash supply
Ash dieback affects supply in several ways:
More felling in the short term. Safety felling of diseased trees near roads, paths and buildings increases the volume of ash on the market in affected areas. The UK Forestry Commission notes that local markets may be available for the wood, firewood or chippings.
Lower quality in some batches. Timber from trees that declined for years may be stained or degraded.
Less high-quality ash in the long term. As mature trees die and replanting favours other species, availability of large, clear ash logs may fall.
Selection matters more. Buyers who need premium, straight-grained, sound ash should specify quality clearly and inspect carefully.
Questions to ask an ash supplier
Question | Why it matters |
Is the timber from healthy or promptly felled trees? | Determines risk of decay and brittleness |
What grade, and are stains or discolouration allowed? | Affects appearance and price |
Is the timber kiln-dried, and to what moisture? | Drying limits further fungal growth and movement |
Can you supply photos or samples? | Lets you check for decay and staining |
What is the origin of the timber? | Needed for EUDR due diligence from 30 Dec 2026 |
Are there plant-health requirements for my destination? | Avoids border problems |
Dekalyi supplies ash as logs, boards and custom dimensions with grade and moisture content available on request. Ask for origin details and samples with your quote.
Why kiln drying helps
Kiln drying reduces moisture to levels at which wood-decay fungi cannot grow, and heat treatment above certain temperatures kills many organisms in the wood. Dry, properly stored ash timber does not continue to decay. For timber destined for interiors, kiln-dried ash at the right moisture content is the safest choice. Note that kiln drying is not the same as plant-health heat treatment under ISPM 15, which has specific time and temperature requirements.
Looking ahead: resistant ash
Researchers and foresters across Europe are identifying ash trees that show tolerance to the disease, with the aim of breeding and replanting more resistant ash. Forest Research's guidance emphasises maintaining genetic diversity in ash to support its long-term presence. This means ash is not disappearing entirely, but the supply of large, high-quality ash timber may be more limited for some decades.
Alternatives when ash is scarce
If high-grade ash is hard to obtain, alternatives include:
Oak for furniture, floors and outdoor work; see ash vs oak.
Beech for furniture, turning and some handles; see beech wood properties.
Thermally modified timbers for exterior cladding and decking.
Checking ash deliveries for dieback-related defects
When ash arrives, inspect a sample of boards from different packs:
Colour: look for dark brown or grey staining that runs into the wood, especially around old branch stubs or wounds.
Feel: press a fingernail or blunt tool into suspect areas; soft or crumbly wood indicates decay.
Sound: sound timber gives a clear knock; decayed timber sounds dull.
Weight: unusually light boards for their size can indicate decay.
Cracks: check ends and faces for shakes and splits.
Record any issues with photographs and pack numbers. Agree in advance how stained or decayed boards will be handled under your contract.
Can stained ash still be used?
Some dieback-affected trees produce boards with dark streaks but sound wood. Where structural toughness is not critical, such as panelling, decorative furniture or turned items, this staining can be acceptable or even attractive, similar to the figure sold as olive ash. The key is to confirm that the wood is sound, not decayed, and to agree with your supplier whether stained boards are included in a grade. For handles, sports goods and load-bearing parts, use only clear, sound timber. If in doubt, cut a test piece from a suspect board and check whether it breaks cleanly with long fibres, which suggests sound wood, or snaps short and brittle, which suggests decay has weakened it.
What it means for buyers outside Europe
Importers outside Europe buying European ash should check their country's plant-health requirements for timber and wood products, which may include treatment or certificates. Kilndried, debarked sawn timber generally presents lower plant-health risk than logs with bark, but rules vary by destination. Ask your supplier which documents they can provide and confirm requirements with your national plant-protection authority before ordering.
Order ash timber from Dekalyi
Dekalyi S.P. Z.O.O supplies ash as logs, boards and custom dimensions, with size, grade and moisture content on request, for furniture, flooring, sports equipment, tool handles and industrial uses. Request a quote and ask for origin details and samples.
FAQ: ash dieback and ash timber
Can ash dieback timber be used?
Yes, if the wood is sound. Timber from healthy or promptly felled trees can be used normally; long-dead or decayed trees yield poorer timber.
Can you burn ash dieback wood?
Yes, when properly dried. Decayed wood may burn less well and can break up during processing.
Does ash dieback make wood weaker?
Advanced decline and secondary decay can make wood brittle and structurally unsound. Sound timber from early-stage trees is less affected.
What causes ash dieback?
The fungus Hymenoscyphus fraxineus, native to eastern Asia, which spreads by airborne spores from infected leaf litter.
When was ash dieback found in the UK?
It was first identified in 2012, although the Woodland Trust notes it may have been present much longer.



Comments