Ash vs Oak: Hardness, Grain, Durability and Price Compared

Ash and oak look alike at first glance. Both are ring-porous European hardwoods with bold grain, both are used for furniture, floors and joinery, and both are sold by Dekalyi. Yet they behave differently, especially outdoors and under impact.
This guide compares European ash (Fraxinus excelsior) and European oak (Quercus robur) on measured properties and practical performance, then shows which to choose for common products. For specifications, see the ash wood and oak wood pages.
Ash vs oak at a glance
Figures are from The Wood Database at about 12% moisture.
Property | European ash | European oak |
Average dried weight | 680 kg/m³ | 675 kg/m³ |
Janka hardness | 1,480 lbf (6,580 N) | 1,120 lbf (4,980 N) |
Bending strength (MOR) | 103.6 MPa | 97.1 MPa |
Stiffness (MOE) | 12.31 GPa | 10.60 GPa |
Crushing strength | 51.0 MPa | 46.3 MPa |
Volumetric shrinkage | 15.3% | 13.0% |
Tangential / radial shrinkage | 9.6% / 5.7% | 8.4% / 4.7% |
Decay resistance (heartwood) | Perishable or slightly durable | Very good |
The headline: ash is harder, stiffer and tougher; oak is more stable and far more durable outdoors.
Is ash harder than oak?
Yes. European ash's Janka hardness of about 1,480 lbf is roughly 30% higher than European oak's 1,120 lbf. In daily use, ash resists dents better. It is also stronger in bending and stiffer.
Ash's real advantage is toughness: resistance to sudden impact. That is why ash, not oak, is the classic wood for tool handles, hockey sticks, hurleys and oars. The Dekalyi ash page describes ash as absorbing shock without splintering.
Stability: oak moves less
Oak's volumetric shrinkage (13.0%) is lower than ash's (15.3%). Both need correct drying, but oak is somewhat more forgiving in wide solid panels and floors exposed to seasonal humidity changes. For ash floors or wide tops, kiln-dried timber at the right moisture content and good acclimatisation are especially important.
Durability: oak's decisive advantage outdoors
Oak heartwood has very good natural resistance to decay, which is why it is used for gates, cladding, timber frames and garden furniture. Ash heartwood is perishable or only slightly durable, and not resistant to insects, according to The Wood Database. Untreated ash belongs indoors.
Thermally modified ash is an exception: heat treatment improves durability enough for decking and cladding. But for ordinary timber outdoors, oak wins clearly.
Grain and colour
Both are ring-porous with open, bold grain, which is why they are often confused.
Ash is generally paler: white to light yellow sapwood and light to dark brown heartwood, as the Dekalyi page describes. Many ash boards are almost entirely pale, giving a clean, Scandinavian look. The grain shows strong contrast between earlywood and latewood.
Oak is light to medium brown and warmer in tone. When quarter sawn, oak shows broad silver ray fleck, which ash does not. Oak darkens noticeably with age and light; ash also ambers but usually stays lighter.
How to tell them apart: look at the quartered face. Large, shiny ray flecks point to oak. On end grain, oak's rays are clearly visible as fine lines; ash's are much less obvious.
Workability
Both machine well with sharp tools and both steam-bend well. Ash is often described as slightly easier to work and finish evenly; oak's tannins mean it can stain black with iron, which ash does not. Both take stain readily because of their open pores.
Finishing
Clear finishes: ash gives a pale, bright surface; oak gives a warmer, golden tone.
Stains: both absorb stain into the pores; test first.
Fuming: a traditional oak technique that relies on oak's tannins. It has little effect on ash.
White or limed finishes: popular on both, emphasising the grain.
Price and availability
Prices change with market conditions, grade and dimensions, so compare quotes on identical specifications. Supply is a factor: ash dieback has affected ash populations across Europe, which can influence availability of high-grade ash in some regions. Oak is widely available, and demand for oak furniture and flooring is strong. Ask Dekalyi for both species in one quote if you are deciding.
Ash vs oak flooring
Factor | Ash flooring | Oak flooring |
Hardness | Higher; resists dents better | Lower but ample for homes |
Stability | Good with correct drying | Better |
Look | Pale, high contrast | Warm, classic, ray fleck if quartered |
Underfloor heating | Possible with care | Commonly used; more forgiving |
Popularity | Niche, design-led | Mainstream |
Ash suits light, contemporary floors where hardness matters; oak remains the safer, more versatile choice.
Ash vs oak firewood
Both are excellent firewood when dry. A European wood-energy reference gives densities at 13% moisture of 720 kg/m³ for ash and 760–770 kg/m³ for oak, so oak holds slightly more heat per log. UK supplier Certainly Wood notes that ash gives a bright flame and burns slightly faster than oak. Ash is often easier to light; oak lasts longer. See our guide to the best firewood to burn.
Which should you choose?
Product | Better choice | Reason |
Tool handles, sports equipment | Ash | Toughness and shock resistance |
Chairs and stressed frames | Ash | Strength and flexibility |
Steam-bent parts | Either; ash very common | Both bend well |
Pale, Scandinavian furniture | Ash | Naturally lighter colour |
Classic or rustic furniture | Oak | Warm colour, ray fleck |
Wide table tops and panels | Oak | Lower movement |
Flooring with underfloor heating | Oak | More stable |
Outdoor furniture, gates, cladding | Oak (heartwood) | Natural durability |
Exterior decking (modified timber) | Thermally modified ash | Improved durability |
Combining ash and oak
Designers sometimes pair them: oak tops with ash legs, or ash frames with oak panels. Because ash moves slightly more, allow for movement in joints, and dry both species to the same moisture content.
Ash vs oak for kitchens
In kitchens, the choice often comes down to style and maintenance. Ash's pale colour brightens small or north-facing kitchens and suits modern, handle-less designs. Oak's warmer tone suits traditional and rustic kitchens. Both resist wear well. Oak's tannins can stain black where iron and water meet, so avoid leaving wet cast-iron pans on oak worktops. Ash does not have this issue, but it is less tolerant of persistent damp, so seal and maintain finishes near sinks.
Ash vs oak for stairs
Stair treads take heavy, concentrated wear. Ash's higher hardness gives it an edge in dent resistance, while oak's stability and familiar look make it the most common choice for staircases.
Both are excellent if finished with a durable floor-grade lacquer or hard-wax oil. Choose based on colour and how the stairs will match surrounding floors.
Sustainability and supply
Neither species is listed in the CITES appendices, according to The Wood Database. Supply dynamics differ:
Ash: ash dieback has reduced healthy ash populations across Europe. In the short term, safety felling increases supply in some areas; in the long term, large, high-quality ash logs may become scarcer. See ash dieback and ash timber.
Oak: widely grown and in strong demand, but slow-growing, so responsible forest management is essential.
For both, ask suppliers for origin information and FSC or PEFC certification where required.
From 30 December 2026, the EU Deforestation Regulation requires operators to carry out due diligence on timber placed on the EU market.
Common mistakes when choosing between ash and oak
Using untreated ash outdoors because it "looks like oak". It will decay quickly.
Choosing oak for tool handles, where ash's toughness is far better.
Ignoring colour expectations. Ash can contain dark heartwood; oak darkens with age.
Installing either wood at the wrong moisture content, leading to gaps or cracks.
Using steel fixings in wet oak, causing black tannin stains.
Ash vs oak for chairs
Chairs are one of the hardest-working furniture items: people lean back, rock and drag them across floors. Ash's toughness and stiffness make it a classic chair wood, especially for legs, stretchers and steam-bent backs, where flexing and impact are common. Oak chairs are also strong and long-lasting, and their weight gives a solid feel, but oak is less forgiving of sudden shocks in thin sections. Many traditional chair makers choose ash for the frame and may use oak or another species for seats or decorative parts.
Worked example: choosing for a dining set
A furniture maker designing a dining set for a bright, modern home might choose:
Table top: oak, for stability across a wide surface and a warm, classic look; or ash if a pale look is essential, with careful drying and a breadboard or floating fixing to allow movement.
Chairs: ash, for toughness in legs and back rails.
Finish: clear hard-wax oil on both, accepting that oak will look warmer and ash paler.
Mixing species in this way plays to each wood's strengths. It also lets a workshop buy each timber in the grades and dimensions where it is most economical, rather than forcing one species into every part of the design. Ask your supplier to quote both species together so lead times and deliveries line up.
Order ash or oak timber from Dekalyi
Dekalyi supplies ash as logs, boards and custom dimensions with size, grade and moisture on request, and oak as logs, boards and custom dimensions at 8–12% moisture, kiln-dried or air-dried. Request a quote for one or both species.
FAQ: ash vs oak
Which is harder, ash or oak?
Ash. European ash is about 1,480 lbf on the Janka scale, against about 1,120 lbf for European oak.
Is ash or oak better for furniture?
Ash suits pale, modern designs and stressed parts like chair frames. Oak suits classic designs, wide tops and pieces that may go outdoors.
Is ash as durable as oak?
Indoors, both last for generations. Outdoors, oak heartwood is far more decay resistant than untreated ash.
How can I tell ash from oak?
Look for oak's large, shiny ray flecks on quartered faces and visible rays on end grain. Ash lacks prominent ray fleck.
Is ash cheaper than oak?
It depends on grade, dimensions and market conditions. Compare quotes on identical specifications.
Is ash or oak better firewood?
Both are excellent. Oak is denser and burns longer; ash lights more easily and burns brightly.
Can ash be used outdoors like oak?
Not untreated. Ash heartwood is perishable or only slightly durable, while oak heartwood has very good decay resistance. Thermally modified ash is an outdoor option.



Comments